CHINAMFG planetary reducer adopts high-end design software and high precision CNC gear hobbing machine processing equipment, with a comprehensive quality control process, to ensure accurate occlusion, smooth operation of high-quality reducer products.
PS series planetary reducer has many advantages such as low noise, high output torque and low back clearance, etc., which can smoothly output motor power to the application end, widely applicable to all kinds of automation industry.
Highly rigid body
Adopt high strength alloy steel, gear through vacuum carburizing hardening treatment, both surface hardness and core toughness, greatly improve the steel and wear resistance characteristics of the body, in the long term use can still maintain high mesh precision
Back clearance of standard single-stage reducer is less than 3 arc minutes (arcmin)
Back clearance of right-angle single reducer is less than 4 arc minutes (arcmin)
High input speed
Can withstand up to 5,000RPM of input speed
High output torque
Helical gear design, compared with the normal gear planetary reducer can provide higher output torque
The transmission efficiency of single segment machine is higher than 97%
The transmission efficiency of double segment machine is higher than 94%
Noise level below 65dB
Fully sealed (IP65) design, no need to replace lubricating oil during the life of the product, easy maintenance
|Motor, Electric Cars, Motorcycle, Marine
|Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
|Hardened Tooth Surface
How to Calculate Gear Ratio in a Gearbox
Gear ratio is a fundamental parameter in a gearbox that represents the ratio of the number of teeth between two gears. It determines how much the output gear rotates in relation to the input gear. The formula to calculate gear ratio is:
Gear Ratio (GR) = Number of Teeth on Output Gear / Number of Teeth on Input Gear
Here’s a step-by-step guide on how to calculate gear ratio:
- Identify the input and output gears in the gearbox.
- Count the number of teeth on the output gear (the gear connected to the output shaft).
- Count the number of teeth on the input gear (the gear connected to the input shaft).
- Plug the values into the gear ratio formula: GR = Number of Teeth on Output Gear / Number of Teeth on Input Gear.
- Calculate the gear ratio by performing the division.
The gear ratio provides insight into how much the input gear needs to rotate to achieve a certain rotation of the output gear. It influences torque, speed, and direction of rotation in the gearbox.
editor by CX 2023-10-08